Store Your Barbell Vertically, Reclaim Your Floor
A barbell lying on the floor is a tripping hazard and a waste of the space you worked hard to free up. The PRx Build Limitless 81" Rack Mount Barbell Storage hangs your bar vertically off an upright or crossmember of the rack you already own, so it lives on the rack instead of across the room.
This is the 81" version, sized specifically for PRx Build Limitless racks and the lower ceilings found in basements, garages and spare rooms. It holds a single Olympic barbell by the sleeve and ships with all the rack mounting hardware you need.
Key Features
Holds one Olympic barbell upright by the sleeve so it takes up inches instead of feet.
Designed around the 81" Build Limitless rack height and the lower ceilings it was made for.
A 1.25" inside-diameter slot accepts standard Olympic barbell sleeves.
Black powder coat protects both the hanger and the knurl and sleeves of your bar.
Attaches to the upright or crossmember that suits your layout, using the top available holes on an upright.
All rack mounting hardware ships in the box, so installation is a single short job.
At 3 lb and 7" x 3" x 4", it adds storage without adding bulk to the rack.
Manufactured in the United States by PRx Performance.
Description
Most home gyms run out of floor before they run out of ambition. PRx built its reputation on getting equipment up off the ground and out of the way, and this barbell hanger applies the same thinking to the one piece of equipment that never fits anywhere: the bar itself. Mount it to an upright or crossmember and your barbell stands vertically against the rack, out of the walking path and ready to grab.
The hanger cradles the bar by its sleeve in a 1.25" slot, which fits Olympic bars without pinching or rattling. The black powder coat is there for a practical reason rather than a cosmetic one, since bare steel on bare steel is how sleeves get gouged. Everything is finished to resist scratching on both sides of the contact point.
Fit matters here. This unit is engineered for 81" Build Limitless racks and is not designed for rack-mounted storage on PRx Profile racks, so check your rack before ordering. For placement, mount it to the top available holes on an upright. To work out the ceiling clearance you need, add 5" to the length of your barbell. That gives you enough room to lift the bar into the hanger and pull it back out without hitting the floor or the ceiling.
Fitness Supply carries the PRx line because it solves the problem most of our customers actually have, which is space. This is a small, inexpensive part that makes a rack noticeably more usable.
Specifications
| Specification | Detail |
|---|---|
| Configuration | Single barbell |
| Dimensions (HxWxD) | 7" x 3" x 4" |
| Product Weight | 3 lb |
| Barbell Slot Size | 1.25" inside diameter (fits Olympic barbells) |
| Color & Finish | Black powder coat |
| Compatibility | 81" PRx Build Limitless racks |
| Not Compatible With | Rack-mounted storage on PRx Profile racks |
| Mounting Hardware | Included |
| Minimum Ceiling Height | Barbell length plus 5" |
| Origin | Made in the USA |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.
PRx Build Limitless 81" Rack Mount Barbell Storage
Vendedor: PRx Performance
Need help with choosing the right product?
Click here to reach out to one of our experts.
Building Dream Gyms Takes Precision 🏋️♂️
At Fitness Supply, we’re focused on building dream gyms—not just stocking shelves. To offer the best selection and pricing, many of our products are ordered directly from our manufacturing partners and may not be stocked in our warehouse. Lead times may vary based on availability.
Store Your Barbell Vertically, Reclaim Your Floor
A barbell lying on the floor is a tripping hazard and a waste of the space you worked hard to free up. The PRx Build Limitless 81" Rack Mount Barbell Storage hangs your bar vertically off an upright or crossmember of the rack you already own, so it lives on the rack instead of across the room.
This is the 81" version, sized specifically for PRx Build Limitless racks and the lower ceilings found in basements, garages and spare rooms. It holds a single Olympic barbell by the sleeve and ships with all the rack mounting hardware you need.
Key Features
Holds one Olympic barbell upright by the sleeve so it takes up inches instead of feet.
Designed around the 81" Build Limitless rack height and the lower ceilings it was made for.
A 1.25" inside-diameter slot accepts standard Olympic barbell sleeves.
Black powder coat protects both the hanger and the knurl and sleeves of your bar.
Attaches to the upright or crossmember that suits your layout, using the top available holes on an upright.
All rack mounting hardware ships in the box, so installation is a single short job.
At 3 lb and 7" x 3" x 4", it adds storage without adding bulk to the rack.
Manufactured in the United States by PRx Performance.
Description
Most home gyms run out of floor before they run out of ambition. PRx built its reputation on getting equipment up off the ground and out of the way, and this barbell hanger applies the same thinking to the one piece of equipment that never fits anywhere: the bar itself. Mount it to an upright or crossmember and your barbell stands vertically against the rack, out of the walking path and ready to grab.
The hanger cradles the bar by its sleeve in a 1.25" slot, which fits Olympic bars without pinching or rattling. The black powder coat is there for a practical reason rather than a cosmetic one, since bare steel on bare steel is how sleeves get gouged. Everything is finished to resist scratching on both sides of the contact point.
Fit matters here. This unit is engineered for 81" Build Limitless racks and is not designed for rack-mounted storage on PRx Profile racks, so check your rack before ordering. For placement, mount it to the top available holes on an upright. To work out the ceiling clearance you need, add 5" to the length of your barbell. That gives you enough room to lift the bar into the hanger and pull it back out without hitting the floor or the ceiling.
Fitness Supply carries the PRx line because it solves the problem most of our customers actually have, which is space. This is a small, inexpensive part that makes a rack noticeably more usable.
Specifications
| Specification | Detail |
|---|---|
| Configuration | Single barbell |
| Dimensions (HxWxD) | 7" x 3" x 4" |
| Product Weight | 3 lb |
| Barbell Slot Size | 1.25" inside diameter (fits Olympic barbells) |
| Color & Finish | Black powder coat |
| Compatibility | 81" PRx Build Limitless racks |
| Not Compatible With | Rack-mounted storage on PRx Profile racks |
| Mounting Hardware | Included |
| Minimum Ceiling Height | Barbell length plus 5" |
| Origin | Made in the USA |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.