No More Stubbed Toes on a Loose Pad
The PRx Profile Axis Pad Storage is a small piece of 10-gauge steel that hangs your Axis Pad, Knee Keeper or Footplate on the wall the moment it comes off the rack. It is the difference between an attachment that has a home and one that lives underfoot.
At 7.25" x 3" x 6.75" and 1.58 lb, it takes a slice of wall you were never using. All mounting hardware is included, and it is designed and made in the USA.
Key Features
Holds the PRx Axis Pad, PRx Knee Keeper or PRx Footplate on one mount.
Heavy-gauge steel in black powder coat, built to take years of daily hanging and grabbing.
Ample margin for the pads and plates it is designed to carry.
7.25" x 3" x 6.75" and 1.58 lb — it fits between studs, beside a rack, almost anywhere.
Everything you need to mount it ships in the box.
American design and manufacturing, consistent with the rest of the Profile line.
Description
Pads are the worst offenders in a tidy gym. They are light enough to move without thinking, awkward enough not to stack, and soft enough that nobody feels bad leaving one on the floor. Then it is under the rack, in the walking lane, or exactly where your bare foot lands.
The Profile Axis Pad Storage handles it with a single wall-mounted bracket. Ten-gauge steel and a 25 lb rating mean it takes the Axis Pad, the Knee Keeper or the Footplate without any hint of sag, and the black powder coat matches the rest of the Profile hardware so the wall stays looking deliberate rather than improvised.
The size is what makes it easy to place. Seven and a quarter inches tall, three wide, under seven deep, and it weighs a shade over a pound and a half. Mount it beside the rack at the height where you actually swap attachments and the whole exchange becomes a single motion — pad off the rack, pad onto the wall, back to the set.
If you also run a Leg Curl / Extension attachment, the Profile Leg Curl / Extension Storage is the natural companion piece. This listing is one configuration with all hardware included — the sort of small, exact fix that keeps a compact gym genuinely usable, which is why Fitness Supply stocks the full PRx storage range.
Specifications
| Specification | Detail |
|---|---|
| Color & Finish | Black powder coat |
| Material | 10-gauge steel |
| Dimensions (H x W x D) | 7.25" x 3" x 6.75" |
| Capacity | 25 lb |
| Product Weight | 1.58 lb |
| Compatible With | PRx Axis Pad, PRx Knee Keeper, PRx Footplate |
| Mounting | Wall mounted |
| Hardware | All mounting hardware included |
| Origin | Designed and made in the USA |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.
PRx Profile Axis Pad Storage
Vendor: PRx Performance
Need help with choosing the right product?
Click here to reach out to one of our experts.
Building Dream Gyms Takes Precision 🏋️♂️
At Fitness Supply, we’re focused on building dream gyms—not just stocking shelves. To offer the best selection and pricing, many of our products are ordered directly from our manufacturing partners and may not be stocked in our warehouse. Lead times may vary based on availability.
No More Stubbed Toes on a Loose Pad
The PRx Profile Axis Pad Storage is a small piece of 10-gauge steel that hangs your Axis Pad, Knee Keeper or Footplate on the wall the moment it comes off the rack. It is the difference between an attachment that has a home and one that lives underfoot.
At 7.25" x 3" x 6.75" and 1.58 lb, it takes a slice of wall you were never using. All mounting hardware is included, and it is designed and made in the USA.
Key Features
Holds the PRx Axis Pad, PRx Knee Keeper or PRx Footplate on one mount.
Heavy-gauge steel in black powder coat, built to take years of daily hanging and grabbing.
Ample margin for the pads and plates it is designed to carry.
7.25" x 3" x 6.75" and 1.58 lb — it fits between studs, beside a rack, almost anywhere.
Everything you need to mount it ships in the box.
American design and manufacturing, consistent with the rest of the Profile line.
Description
Pads are the worst offenders in a tidy gym. They are light enough to move without thinking, awkward enough not to stack, and soft enough that nobody feels bad leaving one on the floor. Then it is under the rack, in the walking lane, or exactly where your bare foot lands.
The Profile Axis Pad Storage handles it with a single wall-mounted bracket. Ten-gauge steel and a 25 lb rating mean it takes the Axis Pad, the Knee Keeper or the Footplate without any hint of sag, and the black powder coat matches the rest of the Profile hardware so the wall stays looking deliberate rather than improvised.
The size is what makes it easy to place. Seven and a quarter inches tall, three wide, under seven deep, and it weighs a shade over a pound and a half. Mount it beside the rack at the height where you actually swap attachments and the whole exchange becomes a single motion — pad off the rack, pad onto the wall, back to the set.
If you also run a Leg Curl / Extension attachment, the Profile Leg Curl / Extension Storage is the natural companion piece. This listing is one configuration with all hardware included — the sort of small, exact fix that keeps a compact gym genuinely usable, which is why Fitness Supply stocks the full PRx storage range.
Specifications
| Specification | Detail |
|---|---|
| Color & Finish | Black powder coat |
| Material | 10-gauge steel |
| Dimensions (H x W x D) | 7.25" x 3" x 6.75" |
| Capacity | 25 lb |
| Product Weight | 1.58 lb |
| Compatible With | PRx Axis Pad, PRx Knee Keeper, PRx Footplate |
| Mounting | Wall mounted |
| Hardware | All mounting hardware included |
| Origin | Designed and made in the USA |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.