Spotter Arms Off the Floor, On the Wall
Spotter arms are heavy, oddly shaped and impossible to lean anywhere without them sliding down. The PRx Spotter Arm Storage mounts them on the wall in a dedicated cradle with both 1" and 5/8" holes, so your safety catches are stored properly and look deliberate doing it.
It fits Profile PRO, Profile ONE and Build Limitless spotter arms, and an optional backer plate protects the drywall behind them from the dings that come with sliding steel in and out.
Key Features
Both 1" and 5/8" holes accept different spotter arm pin diameters on one unit.
Works with Profile PRO, Profile ONE and Build Limitless spotter arms.
Covers the full reach of the arms to keep your wall free of dents and scuffs.
Keeps heavy safety catches off the floor and out of your walking path.
Connects to one or two studs on 16" centers with included lag screws and anchors.
Lag screws and drywall anchors ship with the unit. Made in the USA.
Description
If you train alone, spotter arms are not optional equipment. But they are also the heaviest, most awkward attachment on a rack, and most people end up leaning them against a wall where they scratch the paint and eventually fall over. This unit gives them a proper home a few feet from where you use them.
The dual-hole design is what makes it broadly useful. With both 1" and 5/8" holes, the same storage unit takes Profile PRO, Profile ONE and Build Limitless spotter arms, so it stays useful if you change racks later. The storage itself measures 7.5" x 17.5" x 3.5" and disappears against the wall when the arms are in use.
The optional backer plate is worth considering if you are mounting to finished drywall. It extends the covered area to 10.25" x 36", which spans as far as the spotter arms can reach when you are loading them in and out. Choose a color to match your rack or your wall. With arms stored, the total profile is 26" x 36" x 4", so plan that footprint before you drill.
Mounting is straightforward: one or two studs spaced 16" apart, with all lag screws and drywall anchors included. Made in the USA.
Specifications
| Specification | Detail |
|---|---|
| Hole Sizes | 1" and 5/8" |
| Compatibility | Profile PRO, Profile ONE and Build Limitless spotter arms |
| Mounting | One or two studs spaced 16"; lag screws and drywall anchors included |
| Backer Plate | Optional, available in a choice of color |
| Origin | Made in the USA |
Dimensions
| Configuration | Dimensions (H x W x D) |
|---|---|
| Storage | 7.5" x 17.5" x 3.5" |
| Storage + Backer | 10.25" x 36" x 3.5" |
| Spotter Arms on Storage | 26" x 36" x 4" |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.
PRx Spotter Arm Storage
Vendor: PRx Performance
Need help with choosing the right product?
Click here to reach out to one of our experts.
Building Dream Gyms Takes Precision 🏋️♂️
At Fitness Supply, we’re focused on building dream gyms—not just stocking shelves. To offer the best selection and pricing, many of our products are ordered directly from our manufacturing partners and may not be stocked in our warehouse. Lead times may vary based on availability.
Spotter Arms Off the Floor, On the Wall
Spotter arms are heavy, oddly shaped and impossible to lean anywhere without them sliding down. The PRx Spotter Arm Storage mounts them on the wall in a dedicated cradle with both 1" and 5/8" holes, so your safety catches are stored properly and look deliberate doing it.
It fits Profile PRO, Profile ONE and Build Limitless spotter arms, and an optional backer plate protects the drywall behind them from the dings that come with sliding steel in and out.
Key Features
Both 1" and 5/8" holes accept different spotter arm pin diameters on one unit.
Works with Profile PRO, Profile ONE and Build Limitless spotter arms.
Covers the full reach of the arms to keep your wall free of dents and scuffs.
Keeps heavy safety catches off the floor and out of your walking path.
Connects to one or two studs on 16" centers with included lag screws and anchors.
Lag screws and drywall anchors ship with the unit. Made in the USA.
Description
If you train alone, spotter arms are not optional equipment. But they are also the heaviest, most awkward attachment on a rack, and most people end up leaning them against a wall where they scratch the paint and eventually fall over. This unit gives them a proper home a few feet from where you use them.
The dual-hole design is what makes it broadly useful. With both 1" and 5/8" holes, the same storage unit takes Profile PRO, Profile ONE and Build Limitless spotter arms, so it stays useful if you change racks later. The storage itself measures 7.5" x 17.5" x 3.5" and disappears against the wall when the arms are in use.
The optional backer plate is worth considering if you are mounting to finished drywall. It extends the covered area to 10.25" x 36", which spans as far as the spotter arms can reach when you are loading them in and out. Choose a color to match your rack or your wall. With arms stored, the total profile is 26" x 36" x 4", so plan that footprint before you drill.
Mounting is straightforward: one or two studs spaced 16" apart, with all lag screws and drywall anchors included. Made in the USA.
Specifications
| Specification | Detail |
|---|---|
| Hole Sizes | 1" and 5/8" |
| Compatibility | Profile PRO, Profile ONE and Build Limitless spotter arms |
| Mounting | One or two studs spaced 16"; lag screws and drywall anchors included |
| Backer Plate | Optional, available in a choice of color |
| Origin | Made in the USA |
Dimensions
| Configuration | Dimensions (H x W x D) |
|---|---|
| Storage | 7.5" x 17.5" x 3.5" |
| Storage + Backer | 10.25" x 36" x 3.5" |
| Spotter Arms on Storage | 26" x 36" x 4" |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.