Manufacturer Warranty
Every product ships backed by its manufacturer's warranty for lasting peace of mind.
0% APR Financing
Up to 18 months 0% APR available through promotional financing at checkout.
Dedicated Support Team
Questions before or after your purchase? Our equipment specialists are here to help.
Stainless Through and Through
The PRx Stainless Thresher Bar is stainless steel from shaft to sleeves, not just where the marketing photo shows. That means bare-steel knurl feel with no coating between your hands and the bar, and a finish that shrugs off garage humidity, chalk and sweat for years.
Underneath the finish is a serious general training bar: 20kg, 28.5mm shaft, medium whip, volcano knurl with dual IWF and IPF marks, and a 1,500 lb static load rating. It is built to handle squats, presses, deadlifts and Olympic work.
Key Features
Shaft and sleeves are both stainless steel, so corrosion resistance is not limited to the ends of the bar.
Rated far beyond any home gym lift.
Rated at ≥190,000 PSI ± 5%, so the bar returns straight after heavy work.
Medium-aggression volcano pattern grips chalked hands without shredding them on high-rep sets.
Both knurl mark standards are on the shaft, so your grip is consistent whichever discipline you train.
Smooth, quiet sleeve rotation suited to early mornings and late nights.
Description
Coatings are a compromise: zinc dulls, black oxide needs oiling, and even good chrome puts a layer between your hands and the knurl. Stainless steel removes the compromise, and PRx made the whole bar stainless rather than only the sleeves, which is the more expensive way to do it. The 28.5mm shaft is a middle ground that is thin enough for cleans and snatches and thick enough to feel solid under a heavy squat, and stainless and Derlin bushings keep the sleeves turning smoothly and quietly.
The knurl is a medium-aggression volcano pattern that bites reliably with chalk and holds a deadlift at the top of a heavy set without tearing callouses on a set of twenty, with both IWF and IPF marks cut into the shaft for a consistent reference whether you are pressing to powerlifting standards or snatching to weightlifting ones. Fitness Supply recommends the Stainless Thresher as the buy-once bar for a home gym you plan to keep.
Technical Specifications
| Specification | Detail |
|---|---|
| Barbell Type | General training |
| Barbell Length | 86.5" |
| Barbell Weight | 20kg (45 lb) |
| Shaft Coating | Stainless steel |
| Sleeve Coating | Stainless steel |
| Sleeve Texture | Smooth |
| Shaft Diameter | 28.5mm |
| Usable Sleeve Length | 16-1/8" |
| Static Load Capacity | 1,500 lb |
| Tensile Strength | ≥190,000 PSI ± 5% |
| Whip Level | Medium |
| Knurling Type | Volcano |
| Knurling Aggression | Medium |
| Knurling Marks | IWF / IPF |
| Bushing or Bearing | Stainless and Derlin bushings |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.
PRx Stainless Thresher Bar
Vendor: PRx Performance
Need help with choosing the right product?
Click here to reach out to one of our experts.
Product Availability & Lead Times
Not all products are kept in stock at all times. For most products, the average lead time from the time of order to delivery is approximately 2–3 weeks. Certain products may be temporarily backordered or have longer-than-average lead times due to manufacturer availability, production schedules, or shipping delays. Lead times are estimates and may vary by product and order.
Manufacturer Warranty
Every product ships backed by its manufacturer's warranty for lasting peace of mind.
0% APR Financing
Up to 18 months 0% APR available through promotional financing at checkout.
Dedicated Support Team
Questions before or after your purchase? Our equipment specialists are here to help.
Stainless Through and Through
The PRx Stainless Thresher Bar is stainless steel from shaft to sleeves, not just where the marketing photo shows. That means bare-steel knurl feel with no coating between your hands and the bar, and a finish that shrugs off garage humidity, chalk and sweat for years.
Underneath the finish is a serious general training bar: 20kg, 28.5mm shaft, medium whip, volcano knurl with dual IWF and IPF marks, and a 1,500 lb static load rating. It is built to handle squats, presses, deadlifts and Olympic work.
Key Features
Shaft and sleeves are both stainless steel, so corrosion resistance is not limited to the ends of the bar.
Rated far beyond any home gym lift.
Rated at ≥190,000 PSI ± 5%, so the bar returns straight after heavy work.
Medium-aggression volcano pattern grips chalked hands without shredding them on high-rep sets.
Both knurl mark standards are on the shaft, so your grip is consistent whichever discipline you train.
Smooth, quiet sleeve rotation suited to early mornings and late nights.
Description
Coatings are a compromise: zinc dulls, black oxide needs oiling, and even good chrome puts a layer between your hands and the knurl. Stainless steel removes the compromise, and PRx made the whole bar stainless rather than only the sleeves, which is the more expensive way to do it. The 28.5mm shaft is a middle ground that is thin enough for cleans and snatches and thick enough to feel solid under a heavy squat, and stainless and Derlin bushings keep the sleeves turning smoothly and quietly.
The knurl is a medium-aggression volcano pattern that bites reliably with chalk and holds a deadlift at the top of a heavy set without tearing callouses on a set of twenty, with both IWF and IPF marks cut into the shaft for a consistent reference whether you are pressing to powerlifting standards or snatching to weightlifting ones. Fitness Supply recommends the Stainless Thresher as the buy-once bar for a home gym you plan to keep.
Technical Specifications
| Specification | Detail |
|---|---|
| Barbell Type | General training |
| Barbell Length | 86.5" |
| Barbell Weight | 20kg (45 lb) |
| Shaft Coating | Stainless steel |
| Sleeve Coating | Stainless steel |
| Sleeve Texture | Smooth |
| Shaft Diameter | 28.5mm |
| Usable Sleeve Length | 16-1/8" |
| Static Load Capacity | 1,500 lb |
| Tensile Strength | ≥190,000 PSI ± 5% |
| Whip Level | Medium |
| Knurling Type | Volcano |
| Knurling Aggression | Medium |
| Knurling Marks | IWF / IPF |
| Bushing or Bearing | Stainless and Derlin bushings |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.