Nine Angles, One Rack Attachment
The PRx Axis Pad is a bench, a seal row platform and a support pad that lives on your rack instead of on your floor. It pins to any 3" x 3" upright with 5/8" holes at 4" spacing and pivots through nine locking angles from -90 degrees to 30 degrees.
That range is what makes it more useful than a fixed pad. Run it flat and level for chest supported rows, tip it up for standing incline presses and curls, drop it low for step ups, or use it as a brace for pulley work. Rated to 1,000 lb.
Key Features
Pivots from -90 degrees to 30 degrees so one pad covers rows, presses, curls and support work.
Built to the same standard as the rack it mounts to, with no working weight anxiety.
Mounts to 3" x 3" uprights with 5/8" holes on 4" spacing, so it comes on and off without tools.
Set it horizontal for strict chest supported rows with no lower back involvement.
A 17" x 12" x 4" pad that stays supportive under load and wipes clean after a session.
It stores on the rack instead of taking up the space a dedicated bench would.
Required base for the PRx Leg Curl / Leg Extension attachment and the PRx Knee Keeper.
Finished to match the rest of your PRx setup and hold up to daily handling.
Description
A rack-mounted pad sounds like a small thing until you use one. The Axis Pad replaces a bench, a preacher setup and a seal row platform with one attachment that pins to an upright you already own, and it does all three better because you can put it at exactly the height the movement wants.
The pivot is the heart of it. Nine locking positions run from -90 degrees to 30 degrees, which covers a decline support brace at one end and a comfortable incline at the other. Chest supported rows become strict, because the pad takes your torso out of the equation. Standing incline presses and curls get a solid chest or arm brace. Step ups and pulley work get a stable reference point.
The pad itself is 17" x 12" x 4", smooth vinyl over high density foam, mounted on a black powder coated steel frame with a 1,000 lb capacity. The mount is a straightforward 5/8" pin on 4" hole spacing, so moving it up or down between exercises takes seconds.
It is also the foundation for the rest of the Axis system. The PRx Leg Curl / Leg Extension attachment and the PRx Knee Keeper both require the Axis Pad, so this is the piece that opens the door to a full lower-body station on your rack. Fits 3x3 Build Limitless and Profile PRO racks only.
Specifications
| Specification | Detail |
|---|---|
| Capacity | 1,000 lb |
| Pivot Range | 9 angles from -90 degrees to 30 degrees |
| Pad Dimensions | 17" x 12" x 4" |
| Pad Material | Smooth vinyl over high density foam |
| Color & Finish | Black powder coat |
| Pin Diameter | 5/8" |
| Hole Spacing | 4" |
| Compatibility | 3x3 Build Limitless and Profile PRO racks only |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.
PRx Axis Pad
Vendedor: PRx Performance
Need help with choosing the right product?
Click here to reach out to one of our experts.
Building Dream Gyms Takes Precision 🏋️♂️
At Fitness Supply, we’re focused on building dream gyms—not just stocking shelves. To offer the best selection and pricing, many of our products are ordered directly from our manufacturing partners and may not be stocked in our warehouse. Lead times may vary based on availability.
Nine Angles, One Rack Attachment
The PRx Axis Pad is a bench, a seal row platform and a support pad that lives on your rack instead of on your floor. It pins to any 3" x 3" upright with 5/8" holes at 4" spacing and pivots through nine locking angles from -90 degrees to 30 degrees.
That range is what makes it more useful than a fixed pad. Run it flat and level for chest supported rows, tip it up for standing incline presses and curls, drop it low for step ups, or use it as a brace for pulley work. Rated to 1,000 lb.
Key Features
Pivots from -90 degrees to 30 degrees so one pad covers rows, presses, curls and support work.
Built to the same standard as the rack it mounts to, with no working weight anxiety.
Mounts to 3" x 3" uprights with 5/8" holes on 4" spacing, so it comes on and off without tools.
Set it horizontal for strict chest supported rows with no lower back involvement.
A 17" x 12" x 4" pad that stays supportive under load and wipes clean after a session.
It stores on the rack instead of taking up the space a dedicated bench would.
Required base for the PRx Leg Curl / Leg Extension attachment and the PRx Knee Keeper.
Finished to match the rest of your PRx setup and hold up to daily handling.
Description
A rack-mounted pad sounds like a small thing until you use one. The Axis Pad replaces a bench, a preacher setup and a seal row platform with one attachment that pins to an upright you already own, and it does all three better because you can put it at exactly the height the movement wants.
The pivot is the heart of it. Nine locking positions run from -90 degrees to 30 degrees, which covers a decline support brace at one end and a comfortable incline at the other. Chest supported rows become strict, because the pad takes your torso out of the equation. Standing incline presses and curls get a solid chest or arm brace. Step ups and pulley work get a stable reference point.
The pad itself is 17" x 12" x 4", smooth vinyl over high density foam, mounted on a black powder coated steel frame with a 1,000 lb capacity. The mount is a straightforward 5/8" pin on 4" hole spacing, so moving it up or down between exercises takes seconds.
It is also the foundation for the rest of the Axis system. The PRx Leg Curl / Leg Extension attachment and the PRx Knee Keeper both require the Axis Pad, so this is the piece that opens the door to a full lower-body station on your rack. Fits 3x3 Build Limitless and Profile PRO racks only.
Specifications
| Specification | Detail |
|---|---|
| Capacity | 1,000 lb |
| Pivot Range | 9 angles from -90 degrees to 30 degrees |
| Pad Dimensions | 17" x 12" x 4" |
| Pad Material | Smooth vinyl over high density foam |
| Color & Finish | Black powder coat |
| Pin Diameter | 5/8" |
| Hole Spacing | 4" |
| Compatibility | 3x3 Build Limitless and Profile PRO racks only |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.