Serious Steel Without the Full-Cage Footprint
The PRx Build Limitless Squat Stand strips a power rack down to what most lifters actually use every session: two heavy uprights, a multi-grip pull-up bar, and J-cups that hold your bar exactly where you want it. Built from 3" x 3" 11-gauge steel with a 1,000 lb capacity, it handles heavy squats, presses and pull-ups in a 48" x 61" footprint.
It is the right call for a garage, basement or spare-room gym where a full cage would eat the room but you still refuse to train on flimsy equipment. Made in the USA, and available here in three upright heights and a range of powder-coat colors so it fits your ceiling and your space.
Key Features
Heavy-wall American steel with a durable powder coat rated to a 1,000 lb capacity.
Uprights step down to 1" spacing from 22" to 46" so J-cups and spotter arms land at exactly the right bench height.
Numbers cut into the front and back of each upright make repeating a setup or matching left to right effortless.
2" spacing along the sides of the uprights opens up a wide range of PRx attachments and accessories.
A 1.25" diameter bar with Tuff Powder Coat gives you neutral, wide and standard grips with a confident hold.
Choose 81", 89" or 95" uprights to match your ceiling and your pull-up clearance.
Pick the powder-coat color that suits your gym instead of settling for whatever is in stock.
Ready to load out of the box with assembly hardware and J-cups in the crate.
Description
Not every home gym needs a six-post cage. What most lifters need is a stand that will not flex under a heavy single, will hold a pull-up bar without creaking, and will take the attachments they add over the next ten years. That is what the Build Limitless Squat Stand is. Two 3" x 3" 11-gauge uprights, a 1,000 lb capacity, and a 48" x 61" footprint that leaves you room to actually walk around your bar.
The hole pattern is what separates this from a budget stand. Inside the bench area the uprights drop to 1" spacing between 22" and 46", which is the range where a half-inch of J-cup height is the difference between a clean unrack and a grind. Outside that zone the spacing opens to 2", and the sides of the uprights carry their own 2" pattern for attachments. Laser-cut numbers on both faces mean you set your height once and find it again in seconds.
Configure it to your room: three upright heights and a full range of powder-coat colors, selected using the Height and Color options above. Every stand is made in the USA and ships with assembly hardware and J-cups. We recommend anchoring the stand to the floor; anchoring hardware is sold separately.
Not sure which height clears your ceiling, or which attachments you will want down the road? That is exactly the kind of question our team answers every day.
Specifications
| Specification | Detail |
|---|---|
| Origin | Made in the USA |
| Footprint | 48" x 61" (W x D) |
| Heights | 81", 89" or 95" |
| Capacity | 1,000 lb |
| Steel | 3" x 3" 11-gauge steel with powder coat |
| Hole Size | 5/8" |
| Hole Spacing | 1" inside bench area; 2" outside bench area; 2" on sides |
| Pull-Up Bar | 1.25" diameter multi-grip bar with Tuff Powder Coat |
| J-Cups | Included |
| Hardware | Assembly hardware included; anchoring hardware not included |
| Options | Height and Color |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.
PRx Build Limitless Squat Stand
Vendedor: PRx Performance
Need help with choosing the right product?
Click here to reach out to one of our experts.
Building Dream Gyms Takes Precision 🏋️♂️
At Fitness Supply, we’re focused on building dream gyms—not just stocking shelves. To offer the best selection and pricing, many of our products are ordered directly from our manufacturing partners and may not be stocked in our warehouse. Lead times may vary based on availability.
Serious Steel Without the Full-Cage Footprint
The PRx Build Limitless Squat Stand strips a power rack down to what most lifters actually use every session: two heavy uprights, a multi-grip pull-up bar, and J-cups that hold your bar exactly where you want it. Built from 3" x 3" 11-gauge steel with a 1,000 lb capacity, it handles heavy squats, presses and pull-ups in a 48" x 61" footprint.
It is the right call for a garage, basement or spare-room gym where a full cage would eat the room but you still refuse to train on flimsy equipment. Made in the USA, and available here in three upright heights and a range of powder-coat colors so it fits your ceiling and your space.
Key Features
Heavy-wall American steel with a durable powder coat rated to a 1,000 lb capacity.
Uprights step down to 1" spacing from 22" to 46" so J-cups and spotter arms land at exactly the right bench height.
Numbers cut into the front and back of each upright make repeating a setup or matching left to right effortless.
2" spacing along the sides of the uprights opens up a wide range of PRx attachments and accessories.
A 1.25" diameter bar with Tuff Powder Coat gives you neutral, wide and standard grips with a confident hold.
Choose 81", 89" or 95" uprights to match your ceiling and your pull-up clearance.
Pick the powder-coat color that suits your gym instead of settling for whatever is in stock.
Ready to load out of the box with assembly hardware and J-cups in the crate.
Description
Not every home gym needs a six-post cage. What most lifters need is a stand that will not flex under a heavy single, will hold a pull-up bar without creaking, and will take the attachments they add over the next ten years. That is what the Build Limitless Squat Stand is. Two 3" x 3" 11-gauge uprights, a 1,000 lb capacity, and a 48" x 61" footprint that leaves you room to actually walk around your bar.
The hole pattern is what separates this from a budget stand. Inside the bench area the uprights drop to 1" spacing between 22" and 46", which is the range where a half-inch of J-cup height is the difference between a clean unrack and a grind. Outside that zone the spacing opens to 2", and the sides of the uprights carry their own 2" pattern for attachments. Laser-cut numbers on both faces mean you set your height once and find it again in seconds.
Configure it to your room: three upright heights and a full range of powder-coat colors, selected using the Height and Color options above. Every stand is made in the USA and ships with assembly hardware and J-cups. We recommend anchoring the stand to the floor; anchoring hardware is sold separately.
Not sure which height clears your ceiling, or which attachments you will want down the road? That is exactly the kind of question our team answers every day.
Specifications
| Specification | Detail |
|---|---|
| Origin | Made in the USA |
| Footprint | 48" x 61" (W x D) |
| Heights | 81", 89" or 95" |
| Capacity | 1,000 lb |
| Steel | 3" x 3" 11-gauge steel with powder coat |
| Hole Size | 5/8" |
| Hole Spacing | 1" inside bench area; 2" outside bench area; 2" on sides |
| Pull-Up Bar | 1.25" diameter multi-grip bar with Tuff Powder Coat |
| J-Cups | Included |
| Hardware | Assembly hardware included; anchoring hardware not included |
| Options | Height and Color |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.