Add Cables to the PRO Rack You Already Own
The Sidewinder Functional Trainer Attachment brings Dialed Motion's cable system to a Profile PRO folding rack you already have. Order it single-sided to start, or dual-sided to run both cables at once.
This is the attachment only. J-cups are not included with an attachment-only purchase, and it does not fit Profile ONE (2x3) racks.
Key Features
Pick one side to get started or both to stop swapping the cable between exercises.
Travels the full upright from the lowest locking hole to the highest, held magnetically or removed by hand.
Plate-loaded posts with 13.75" of usable length handle real training loads.
The upper arm tucks into the rack's existing envelope, preserving your ceiling clearance.
70" of cable travel on a 95" rack, 64" on an 89" rack.
Just 9" x 15.5" x 0.8", so it disappears into the rack line when folded.
Description
If you already own a Profile PRO rack, this is the least disruptive way to add cable training to it. The Sidewinder attachment mounts to your existing uprights and turns a folding squat rack into a dual-purpose machine, without a new footprint and without giving up the fold.
The three-sided trolley is the piece that makes it work day to day. It slides the whole length of the upright and holds where you put it magnetically, and it lifts off completely when you need to reposition it above or below the lower linkage arms. Moving from a leg extension to a glute kickback to a lat pulldown is a matter of seconds.
Plate-loaded to 250 lbs per side with 13.75" of usable post, it covers belt squats, low rows, pulldowns, leg curls and extensions, preacher curls, chest flys, crossover reverse flys, military press and cable crunches. Combine it with the PRx Axis Pad and Knee Keeper for pulldowns, or the Profile Incline Weight Bench for seated flys and presses.
On single versus dual: one side genuinely does handle both left and right-handed work. Dual sided simply saves you the reset between sets, which adds up over a training week. Note that J-cups are not included when you buy the attachment on its own, and this does not fit Profile ONE (2x3) racks.
Specifications
| Specification | Detail |
|---|---|
| Upper Arm Dimensions (H x W x D) | 9" x 15.5" x 0.8" |
| Pulley Weight Capacity | 250 lbs per side |
| Pulley Ratio | 1:1 |
| Cable Travel (95" rack / 89" rack) | 70" (64") |
| Weight Post | 13.75" usable length |
| Compatibility | Profile PRO racks (95", 89" or 81") |
| Not Compatible With | Profile ONE (2x3) racks |
| J-Cups | Not included with attachment-only purchase |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.
PRx Profile PRO Sidewinder Functional Trainer Attachment
Vendedor: PRx Performance
Need help with choosing the right product?
Click here to reach out to one of our experts.
Building Dream Gyms Takes Precision 🏋️♂️
At Fitness Supply, we’re focused on building dream gyms—not just stocking shelves. To offer the best selection and pricing, many of our products are ordered directly from our manufacturing partners and may not be stocked in our warehouse. Lead times may vary based on availability.
Add Cables to the PRO Rack You Already Own
The Sidewinder Functional Trainer Attachment brings Dialed Motion's cable system to a Profile PRO folding rack you already have. Order it single-sided to start, or dual-sided to run both cables at once.
This is the attachment only. J-cups are not included with an attachment-only purchase, and it does not fit Profile ONE (2x3) racks.
Key Features
Pick one side to get started or both to stop swapping the cable between exercises.
Travels the full upright from the lowest locking hole to the highest, held magnetically or removed by hand.
Plate-loaded posts with 13.75" of usable length handle real training loads.
The upper arm tucks into the rack's existing envelope, preserving your ceiling clearance.
70" of cable travel on a 95" rack, 64" on an 89" rack.
Just 9" x 15.5" x 0.8", so it disappears into the rack line when folded.
Description
If you already own a Profile PRO rack, this is the least disruptive way to add cable training to it. The Sidewinder attachment mounts to your existing uprights and turns a folding squat rack into a dual-purpose machine, without a new footprint and without giving up the fold.
The three-sided trolley is the piece that makes it work day to day. It slides the whole length of the upright and holds where you put it magnetically, and it lifts off completely when you need to reposition it above or below the lower linkage arms. Moving from a leg extension to a glute kickback to a lat pulldown is a matter of seconds.
Plate-loaded to 250 lbs per side with 13.75" of usable post, it covers belt squats, low rows, pulldowns, leg curls and extensions, preacher curls, chest flys, crossover reverse flys, military press and cable crunches. Combine it with the PRx Axis Pad and Knee Keeper for pulldowns, or the Profile Incline Weight Bench for seated flys and presses.
On single versus dual: one side genuinely does handle both left and right-handed work. Dual sided simply saves you the reset between sets, which adds up over a training week. Note that J-cups are not included when you buy the attachment on its own, and this does not fit Profile ONE (2x3) racks.
Specifications
| Specification | Detail |
|---|---|
| Upper Arm Dimensions (H x W x D) | 9" x 15.5" x 0.8" |
| Pulley Weight Capacity | 250 lbs per side |
| Pulley Ratio | 1:1 |
| Cable Travel (95" rack / 89" rack) | 70" (64") |
| Weight Post | 13.75" usable length |
| Compatibility | Profile PRO racks (95", 89" or 81") |
| Not Compatible With | Profile ONE (2x3) racks |
| J-Cups | Not included with attachment-only purchase |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.