Force USA® Peak Flat Bench
The Peak of Competitive Lifting
The Force USA® Peak Flat Bench is what happens when engineers who actually train build a bench from the ground up. At 79.4 lbs of 3x3" 11-gauge steel and ultra-dense foam, this isn't a bench that moves when you don't want it to. It's a bench that stays planted so you can press with total confidence, rep after rep.
The Peak Flat Bench has a 1,000 lb weight capacity with a single-column front foot for unrestricted leg drive, and a back pad that locks you into position under heavy load. The Peak delivers the kind of stability that lets you forget about the equipment and focus entirely on the lift. Whether you're chasing a new PR or grinding through volume sets, this is the foundation your training deserves.
Built for lifters who refuse to hold back — 1,000 lbs / 453.6 kg of rated capacity with zero flex under load.
Thick-wall 3x3" 11-gauge steel tubing and heavy-duty bolts create a rigid, zero-flex foundation.
A single front column leaves the area beneath the bench wide open. Plant your feet, drive hard, and keep full contact through the press.
At 17 in / 43.2 cm, the Peak sits within International Powerlifting Federation regulation height — train the way you'll compete.
Dense, supportive foam holds its shape and keeps you locked into position during heavy pressing.
Mesh-backed rip-stop material that stands up to daily punishment, wipes down easily, and resists wear.
Dual rear transport wheels and a built-in front handle make repositioning fast and effortless between sets.
Rubber feet keep the bench planted on any surface, protecting your floor and eliminating slide.
Force USA® backs the Peak's frame with a Limited Lifetime Structural Warranty so you can train with confidence.
Specifications
| Specification | Detail |
|---|---|
| Frame | 3x3" 11-Gauge Steel |
| Weight Capacity | 1,000 lbs / 454 kg |
| Bench Height | 17 in / 43 cm (IPF-Compliant) |
| Bench Length | 52 in / 132 cm |
| Pad Length | 47 in / 119 cm |
| Pad Width | 11.6 in / 30 cm |
| Bench Weight | 79.4 lbs / 36 kg |
| Back Pad | Ultra-Dense Foam |
| Upholstery | Premium Rip-Stop, Mesh-Backed |
| Design | Tripod / Single-Column Front Foot |
| Portability | Dual Rear Transport Wheels + Front Handle |
| Stability | Rubber Feet |
| Warranty | Limited Lifetime Structural |
Frequently Asked Questions
Q: Is the Peak Flat Bench competition legal?
The bench height is 17 in / 43 cm, which falls within the International Powerlifting Federation's regulation range — so your training setup matches what you'll meet on the platform.
Q: How much weight can it handle?
The Peak is rated to 1,000 lbs / 454 kg. The 3x3" 11-gauge steel frame and heavy-duty bolted construction are built to stay rigid at the top of that range.
Q: Can I move it on my own?
Yes. At 79.4 lbs the bench is substantial, but dual rear transport wheels and a front handle let you tilt and roll it into position solo.
Q: Will it slide during heavy pressing?
Rubber feet on the base grip the floor and protect the surface underneath, and the tripod design keeps the load planted through the press.
Q: What's covered under warranty?
The frame carries a Limited Lifetime Structural Warranty. Upholstery and wear components are covered under Force USA's standard warranty terms.
Why Buy From Fitness Supply?
At Fitness Supply, we stand behind every piece of equipment we sell. Our team of fitness equipment specialists is here to help you find the perfect setup for your space and goals. We offer competitive pricing, expert support, and fast shipping on all orders. Contact us today with any questions — we're here to help you build your best gym.
Force USA Peak Flat Bench
Vendor: Force USA
Need help with choosing the right product?
Click here to reach out to one of our experts.
Building Dream Gyms Takes Precision 🏋️♂️
At Fitness Supply, we’re focused on building dream gyms—not just stocking shelves. To offer the best selection and pricing, many of our products are ordered directly from our manufacturing partners and may not be stocked in our warehouse. Lead times may vary based on availability.
Force USA® Peak Flat Bench
The Peak of Competitive Lifting
The Force USA® Peak Flat Bench is what happens when engineers who actually train build a bench from the ground up. At 79.4 lbs of 3x3" 11-gauge steel and ultra-dense foam, this isn't a bench that moves when you don't want it to. It's a bench that stays planted so you can press with total confidence, rep after rep.
The Peak Flat Bench has a 1,000 lb weight capacity with a single-column front foot for unrestricted leg drive, and a back pad that locks you into position under heavy load. The Peak delivers the kind of stability that lets you forget about the equipment and focus entirely on the lift. Whether you're chasing a new PR or grinding through volume sets, this is the foundation your training deserves.
Built for lifters who refuse to hold back — 1,000 lbs / 453.6 kg of rated capacity with zero flex under load.
Thick-wall 3x3" 11-gauge steel tubing and heavy-duty bolts create a rigid, zero-flex foundation.
A single front column leaves the area beneath the bench wide open. Plant your feet, drive hard, and keep full contact through the press.
At 17 in / 43.2 cm, the Peak sits within International Powerlifting Federation regulation height — train the way you'll compete.
Dense, supportive foam holds its shape and keeps you locked into position during heavy pressing.
Mesh-backed rip-stop material that stands up to daily punishment, wipes down easily, and resists wear.
Dual rear transport wheels and a built-in front handle make repositioning fast and effortless between sets.
Rubber feet keep the bench planted on any surface, protecting your floor and eliminating slide.
Force USA® backs the Peak's frame with a Limited Lifetime Structural Warranty so you can train with confidence.
Specifications
| Specification | Detail |
|---|---|
| Frame | 3x3" 11-Gauge Steel |
| Weight Capacity | 1,000 lbs / 454 kg |
| Bench Height | 17 in / 43 cm (IPF-Compliant) |
| Bench Length | 52 in / 132 cm |
| Pad Length | 47 in / 119 cm |
| Pad Width | 11.6 in / 30 cm |
| Bench Weight | 79.4 lbs / 36 kg |
| Back Pad | Ultra-Dense Foam |
| Upholstery | Premium Rip-Stop, Mesh-Backed |
| Design | Tripod / Single-Column Front Foot |
| Portability | Dual Rear Transport Wheels + Front Handle |
| Stability | Rubber Feet |
| Warranty | Limited Lifetime Structural |
Frequently Asked Questions
Q: Is the Peak Flat Bench competition legal?
The bench height is 17 in / 43 cm, which falls within the International Powerlifting Federation's regulation range — so your training setup matches what you'll meet on the platform.
Q: How much weight can it handle?
The Peak is rated to 1,000 lbs / 454 kg. The 3x3" 11-gauge steel frame and heavy-duty bolted construction are built to stay rigid at the top of that range.
Q: Can I move it on my own?
Yes. At 79.4 lbs the bench is substantial, but dual rear transport wheels and a front handle let you tilt and roll it into position solo.
Q: Will it slide during heavy pressing?
Rubber feet on the base grip the floor and protect the surface underneath, and the tripod design keeps the load planted through the press.
Q: What's covered under warranty?
The frame carries a Limited Lifetime Structural Warranty. Upholstery and wear components are covered under Force USA's standard warranty terms.
Why Buy From Fitness Supply?
At Fitness Supply, we stand behind every piece of equipment we sell. Our team of fitness equipment specialists is here to help you find the perfect setup for your space and goals. We offer competitive pricing, expert support, and fast shipping on all orders. Contact us today with any questions — we're here to help you build your best gym.