1,000 lbs Bolted to the Wall
The Build Limitless Wall-Mount Rack anchors to your wall and gives back the floor. Two depth options let you choose between a shallow 21.75" profile and a 45.75" setup with room to bench inside, both rated to 1,000 lbs in 3x3" 11-gauge steel.
Made in the USA and available in three heights, two depths and six colors, so you can size it precisely to the wall you have.
Key Features
The rack lives on the wall, leaving your floor clear for lifting, parking or anything else.
21.75" for the tightest spaces or 45.75" when you want to bench and squat inside the rack.
3x3" 11-gauge steel with a powder coat finish.
Precise J-cup and spotter arm placement, with 2" spacing outside that range.
Numbered front and back uprights make repeatable setups easy.
Tuff powder coat finish for a grip that lasts.
Shipping in 3 to 5 business days.
Assembly hardware included; anchoring hardware and ledger board sold separately.
Description
Wall-mounting is the simplest way to get a real rack into a room that has another job. Bolt this one to a properly prepared wall and the entire 48"-wide frame sits against it, with the uprights carrying the same 1,000 lb rating as our free-standing Build Limitless racks.
The depth choice is the decision that matters. At 21.75" the rack is barely deeper than the uprights themselves, which suits a narrow garage wall or a shared space where clearance is tight. At 45.75" you get room to put a bench inside the rack and press with the spotter arms in place. Both options come in 81", 89" or 95" heights.
Everything else is standard Build Limitless: 3x3" 11-gauge steel in a powder coat finish, 5/8" holes, 1" spacing through the bench area where a single hole changes your press setup, 2" spacing outside it, and 2" on the sides for attachments and storage. Laser-cut numbers on the front and back uprights let you reproduce a setup exactly.
A few practical notes before you order: the ledger board is not included, and while assembly hardware ships with the rack, floor anchoring hardware does not. We recommend anchoring to the floor. All Build Limitless racks ship in 3 to 5 business days unless your order confirmation says otherwise. If you are unsure your wall is suitable, call us before you buy.
Specifications
| Specification | Detail |
|---|---|
| Footprint Width | 48" |
| Footprint Depth | 21.75" or 45.75" |
| Heights | 81", 89" or 95" |
| Capacity | 1,000 lbs |
| Steel | 3x3" 11-gauge steel, powder coated |
| Hole Size | 5/8" |
| Hole Spacing | 1" inside the bench area, 2" outside, 2" on the sides |
| Pull-Up Bar | 1.25" diameter multi-grip, Tuff powder coat |
| Hardware | Assembly hardware included; anchoring hardware not included |
| Ledger Board | Not included |
| J-Cups | Included |
| Origin | Made in the USA |
| Lead Time | Ships in 3-5 business days |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.
PRx Build Limitless Wall-Mount Rack
Vendor: PRx Performance
Need help with choosing the right product?
Click here to reach out to one of our experts.
Building Dream Gyms Takes Precision 🏋️♂️
At Fitness Supply, we’re focused on building dream gyms—not just stocking shelves. To offer the best selection and pricing, many of our products are ordered directly from our manufacturing partners and may not be stocked in our warehouse. Lead times may vary based on availability.
1,000 lbs Bolted to the Wall
The Build Limitless Wall-Mount Rack anchors to your wall and gives back the floor. Two depth options let you choose between a shallow 21.75" profile and a 45.75" setup with room to bench inside, both rated to 1,000 lbs in 3x3" 11-gauge steel.
Made in the USA and available in three heights, two depths and six colors, so you can size it precisely to the wall you have.
Key Features
The rack lives on the wall, leaving your floor clear for lifting, parking or anything else.
21.75" for the tightest spaces or 45.75" when you want to bench and squat inside the rack.
3x3" 11-gauge steel with a powder coat finish.
Precise J-cup and spotter arm placement, with 2" spacing outside that range.
Numbered front and back uprights make repeatable setups easy.
Tuff powder coat finish for a grip that lasts.
Shipping in 3 to 5 business days.
Assembly hardware included; anchoring hardware and ledger board sold separately.
Description
Wall-mounting is the simplest way to get a real rack into a room that has another job. Bolt this one to a properly prepared wall and the entire 48"-wide frame sits against it, with the uprights carrying the same 1,000 lb rating as our free-standing Build Limitless racks.
The depth choice is the decision that matters. At 21.75" the rack is barely deeper than the uprights themselves, which suits a narrow garage wall or a shared space where clearance is tight. At 45.75" you get room to put a bench inside the rack and press with the spotter arms in place. Both options come in 81", 89" or 95" heights.
Everything else is standard Build Limitless: 3x3" 11-gauge steel in a powder coat finish, 5/8" holes, 1" spacing through the bench area where a single hole changes your press setup, 2" spacing outside it, and 2" on the sides for attachments and storage. Laser-cut numbers on the front and back uprights let you reproduce a setup exactly.
A few practical notes before you order: the ledger board is not included, and while assembly hardware ships with the rack, floor anchoring hardware does not. We recommend anchoring to the floor. All Build Limitless racks ship in 3 to 5 business days unless your order confirmation says otherwise. If you are unsure your wall is suitable, call us before you buy.
Specifications
| Specification | Detail |
|---|---|
| Footprint Width | 48" |
| Footprint Depth | 21.75" or 45.75" |
| Heights | 81", 89" or 95" |
| Capacity | 1,000 lbs |
| Steel | 3x3" 11-gauge steel, powder coated |
| Hole Size | 5/8" |
| Hole Spacing | 1" inside the bench area, 2" outside, 2" on the sides |
| Pull-Up Bar | 1.25" diameter multi-grip, Tuff powder coat |
| Hardware | Assembly hardware included; anchoring hardware not included |
| Ledger Board | Not included |
| J-Cups | Included |
| Origin | Made in the USA |
| Lead Time | Ships in 3-5 business days |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.