An IPF-Height Bench That Folds to 7 Inches
The PRx Compact Flat Weight Bench sets up in seconds, holds 660 lb, and collapses to a 7" thick panel that hangs on the wall storage included in the box. The legs lock in place with 1/2" pins, so deployment is a two-step job with no tools and no fiddling.
At 17" tall it meets IPF competition bench height, which means the pressing position you train at home is the same one you will use on the platform. It is the answer for lifters who need a real bench in a space that cannot permanently give up the floor.
Key Features
Legs collapse and the bench drops from 17" to 7" thick, ready to hang on the wall.
A 12" x 18" x 4" wall mount ships with the bench so it never lives on your floor.
The 17" pad height matches International Powerlifting Federation standards for meet-accurate training.
Rated well beyond what a folding bench is usually good for.
The legs pin solidly into position, so the bench feels fixed rather than folded.
Light enough to lift onto the wall bracket single-handed at the end of a session.
The wall storage mounts to a single stud or to studs on 12" or 16" centres.
Full-length support for pressing without the bulk of a fixed commercial bench.
Description
Most folding benches ask you to accept a wobble in exchange for the space they save. This one does not. The legs drop into place and lock with 1/2" pins, the same hardware standard PRx uses across its racks, and the result is a 660 lb rated bench that behaves like a fixed one once it is set up.
The height is the detail serious lifters will notice. At 17" the pad sits at IPF competition height, so your arch, leg drive and bar path at home carry straight over to a meet. Plenty of home benches are an inch or two off, and that inch changes the lift.
Storage is the other half of the pitch. Fold the legs and the bench becomes a 7" thick panel that lifts onto the included wall bracket. It mounts to a single stud, or to studs on 12" or 16" centres, so you can put it wherever the wall allows. A 35 lb bench is easy to hang and easy to take down, which means you will actually do it rather than leaving it in the middle of the garage.
Fitness Supply carries PRx because the space-saving engineering is genuine, not marketing. If your gym doubles as a parking spot, a laundry room or a workshop, this is the flat bench that fits the compromise.
Specifications
| Specification | Detail |
|---|---|
| Dimensions Folded Out (LxWxH) | 45" x 14.25" x 17" |
| Dimensions Stored (LxWxH) | 45" x 14.25" x 7" |
| Product Weight | 35 lb |
| Weight Capacity | 660 lb |
| Bench Height | 17" (meets IPF height standard) |
| Leg Locking Pins | 1/2" |
Included Wall Storage
| Specification | Detail |
|---|---|
| Dimensions (HxWxD) | 12" x 18" x 4" |
| Mounts To | Single stud, or studs on 12" or 16" centres |
| Included | Yes, ships with the bench |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.
PRx Compact Flat Weight Bench
Vendor: PRx Performance
Need help with choosing the right product?
Click here to reach out to one of our experts.
Building Dream Gyms Takes Precision 🏋️♂️
At Fitness Supply, we’re focused on building dream gyms—not just stocking shelves. To offer the best selection and pricing, many of our products are ordered directly from our manufacturing partners and may not be stocked in our warehouse. Lead times may vary based on availability.
An IPF-Height Bench That Folds to 7 Inches
The PRx Compact Flat Weight Bench sets up in seconds, holds 660 lb, and collapses to a 7" thick panel that hangs on the wall storage included in the box. The legs lock in place with 1/2" pins, so deployment is a two-step job with no tools and no fiddling.
At 17" tall it meets IPF competition bench height, which means the pressing position you train at home is the same one you will use on the platform. It is the answer for lifters who need a real bench in a space that cannot permanently give up the floor.
Key Features
Legs collapse and the bench drops from 17" to 7" thick, ready to hang on the wall.
A 12" x 18" x 4" wall mount ships with the bench so it never lives on your floor.
The 17" pad height matches International Powerlifting Federation standards for meet-accurate training.
Rated well beyond what a folding bench is usually good for.
The legs pin solidly into position, so the bench feels fixed rather than folded.
Light enough to lift onto the wall bracket single-handed at the end of a session.
The wall storage mounts to a single stud or to studs on 12" or 16" centres.
Full-length support for pressing without the bulk of a fixed commercial bench.
Description
Most folding benches ask you to accept a wobble in exchange for the space they save. This one does not. The legs drop into place and lock with 1/2" pins, the same hardware standard PRx uses across its racks, and the result is a 660 lb rated bench that behaves like a fixed one once it is set up.
The height is the detail serious lifters will notice. At 17" the pad sits at IPF competition height, so your arch, leg drive and bar path at home carry straight over to a meet. Plenty of home benches are an inch or two off, and that inch changes the lift.
Storage is the other half of the pitch. Fold the legs and the bench becomes a 7" thick panel that lifts onto the included wall bracket. It mounts to a single stud, or to studs on 12" or 16" centres, so you can put it wherever the wall allows. A 35 lb bench is easy to hang and easy to take down, which means you will actually do it rather than leaving it in the middle of the garage.
Fitness Supply carries PRx because the space-saving engineering is genuine, not marketing. If your gym doubles as a parking spot, a laundry room or a workshop, this is the flat bench that fits the compromise.
Specifications
| Specification | Detail |
|---|---|
| Dimensions Folded Out (LxWxH) | 45" x 14.25" x 17" |
| Dimensions Stored (LxWxH) | 45" x 14.25" x 7" |
| Product Weight | 35 lb |
| Weight Capacity | 660 lb |
| Bench Height | 17" (meets IPF height standard) |
| Leg Locking Pins | 1/2" |
Included Wall Storage
| Specification | Detail |
|---|---|
| Dimensions (HxWxD) | 12" x 18" x 4" |
| Mounts To | Single stud, or studs on 12" or 16" centres |
| Included | Yes, ships with the bench |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.