JavaScript is required to view this page.
PRx Gym Accessory Storage Skip to content

Your cart is empty

Continue shopping
Skip to product info

Seven Hooks That End the Pile in the Corner

Bands, jump ropes, cable attachments, foam rollers — the small gear multiplies faster than anything else in a home gym, and it always ends up in the same tangled heap. The PRx Gym Accessory Storage is a wall-mounted steel bar with seven slotted hooks that gives every piece a home you can reach without digging.

It mounts to the wall or between the uprights of a Profile Rack, so it slots into the setup you already own instead of asking for new floor space.

Key Features

Seven Slotted Hooks
Enough hooks for the bands, ropes, straps and attachments that normally live in a bin on the floor.
Wall or Rack Mounting
Fix it to the wall, or mount it between the uprights of a Profile Rack to use dead space you already have.
Slim Profile
Projects just 5" from the wall, so it stays clear of your lifting path and walkways.
Steel Construction
Black powder-coated steel that holds its finish in a garage and shrugs off daily grabbing.
Everything in Sight
Gear hangs in the open where you can see and grab it, instead of being buried at the bottom of a tub.
Hardware Included
All required mounting hardware ships with it for a fast, single-tool install.

Description

Nobody plans to own fourteen resistance bands. It happens one purchase at a time, and then one day the corner of the garage is a nest of rubber, nylon and metal clips that takes four minutes to untangle before a warm-up you meant to start immediately.

The PRx Gym Accessory Storage is the unglamorous fix. Seven slotted hooks on a powder-coated steel bar, mounted at whatever height suits you, and suddenly every band hangs by length, every rope hangs straight, and the lat bar and triangle handle are on a hook instead of on the floor beside the cable stack. Foam rollers, ab straps, wrist wraps, collars — if it hangs, it lives here.

The mounting flexibility is what makes it worth the wall. It takes a standard wall install, but it will also mount between the uprights of a Profile Rack, which turns a gap you were never using into organized storage. PRx suggests putting it more than three feet off the floor so longer items hang clear, and that also keeps it above the zone where you set down plates and bars.

A note on load: it is built from steel and it is genuinely sturdy, but it is designed for accessories rather than barbells. Use it for what it is meant for and it will outlast the gear hanging on it. Single configuration, no options to choose — add it, hang it, and get your floor back.

Specifications

Specification Detail
Color & Finish Black powder coat
Material Steel
Dimensions (W x H x D) 18" (27") x 2.5" x 5"
Hooks 7 slotted hooks
Mounting Wall mounted, or between the uprights of a Profile Rack
Recommended Mounting Height More than 3 feet off the floor for hanging accessory clearance
Intended Load Gym accessories — not recommended for barbell storage
Hardware All required mounting hardware included

Ready to Build Your Dream Gym?

Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.

PRx Gym Accessory Storage

Vendor: PRx Performance

Regular price $47.99
Pay using HSA/FSA with flex Select Flex at checkout to pay for your HSA/FSA eligible items

Need help with choosing the right product?

Click here to reach out to one of our experts.

Building Dream Gyms Takes Precision 🏋️‍♂️

At Fitness Supply, we’re focused on building dream gyms—not just stocking shelves. To offer the best selection and pricing, many of our products are ordered directly from our manufacturing partners and may not be stocked in our warehouse. Lead times may vary based on availability.

Seven Hooks That End the Pile in the Corner

Bands, jump ropes, cable attachments, foam rollers — the small gear multiplies faster than anything else in a home gym, and it always ends up in the same tangled heap. The PRx Gym Accessory Storage is a wall-mounted steel bar with seven slotted hooks that gives every piece a home you can reach without digging.

It mounts to the wall or between the uprights of a Profile Rack, so it slots into the setup you already own instead of asking for new floor space.

Key Features

Seven Slotted Hooks
Enough hooks for the bands, ropes, straps and attachments that normally live in a bin on the floor.
Wall or Rack Mounting
Fix it to the wall, or mount it between the uprights of a Profile Rack to use dead space you already have.
Slim Profile
Projects just 5" from the wall, so it stays clear of your lifting path and walkways.
Steel Construction
Black powder-coated steel that holds its finish in a garage and shrugs off daily grabbing.
Everything in Sight
Gear hangs in the open where you can see and grab it, instead of being buried at the bottom of a tub.
Hardware Included
All required mounting hardware ships with it for a fast, single-tool install.

Description

Nobody plans to own fourteen resistance bands. It happens one purchase at a time, and then one day the corner of the garage is a nest of rubber, nylon and metal clips that takes four minutes to untangle before a warm-up you meant to start immediately.

The PRx Gym Accessory Storage is the unglamorous fix. Seven slotted hooks on a powder-coated steel bar, mounted at whatever height suits you, and suddenly every band hangs by length, every rope hangs straight, and the lat bar and triangle handle are on a hook instead of on the floor beside the cable stack. Foam rollers, ab straps, wrist wraps, collars — if it hangs, it lives here.

The mounting flexibility is what makes it worth the wall. It takes a standard wall install, but it will also mount between the uprights of a Profile Rack, which turns a gap you were never using into organized storage. PRx suggests putting it more than three feet off the floor so longer items hang clear, and that also keeps it above the zone where you set down plates and bars.

A note on load: it is built from steel and it is genuinely sturdy, but it is designed for accessories rather than barbells. Use it for what it is meant for and it will outlast the gear hanging on it. Single configuration, no options to choose — add it, hang it, and get your floor back.

Specifications

Specification Detail
Color & Finish Black powder coat
Material Steel
Dimensions (W x H x D) 18" (27") x 2.5" x 5"
Hooks 7 slotted hooks
Mounting Wall mounted, or between the uprights of a Profile Rack
Recommended Mounting Height More than 3 feet off the floor for hanging accessory clearance
Intended Load Gym accessories — not recommended for barbell storage
Hardware All required mounting hardware included

Ready to Build Your Dream Gym?

Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.

Warranty Included
Easy Returns
Secure Checkout