Built Stiff for the Big Three
The PRx Reef Power Barbell is a dedicated powerlifting bar: a 29mm shaft with low whip, aggressive mountain knurling from end to end, and a 2,000 lb static load rating. Under a maximal squat it stays where you put it instead of oscillating on the walk-out.
The shaft is fully knurled with IPF standard marks, so the bar grips your back on squats and your hands on deadlifts. If your training is squat, bench and deadlift, this is the bar built for it.
Key Features
The highest capacity in the PRx barbell range, rated for the heaviest powerlifting loads.
Rated at ≥220,000 PSI ± 5%, exceptionally high-tensile steel for a stiff, resilient shaft.
A rigid 29mm shaft that does not bounce or sway when you unrack a maximal squat.
Sharp mountain knurling holds a heavy deadlift without a hook grip slipping.
Knurl runs the full length, including the centre, so the bar locks onto your back under a low-bar squat.
Powerlifting standard markings for competition-accurate hand and grip placement.
Grooved sleeve texture with a QPQ finish keeps plates from sliding once collared.
Controlled, quiet sleeve rotation that suits slow, heavy lifting rather than fast Olympic turnover.
Description
A power bar is not a general training bar with a different label. The whole design brief is stiffness. When you unrack 500 lb, a flexible bar keeps moving after you have stopped, and that oscillation costs you the setup. The Reef is built to eliminate it: a thicker 29mm shaft, ≥220,000 PSI tensile steel, and Derlin bushings that give controlled rather than free-spinning sleeves.
The knurl matches the intent. Mountain knurling is cut sharper and more aggressive than a volcano pattern, and the Reef runs it the full length of the shaft including the centre. That centre knurl is the detail powerlifters look for: under a low-bar squat it grips your shirt and back so the bar does not creep down your spine mid-set. It is also the reason this is not the bar you want for high-rep cleans.
IPF standard marks give you the competition reference points for bench grip width and hand placement, so what you rehearse at home matches what you do on the platform. Grooved QPQ sleeves keep plates seated and shrug off the wear of repeated loading.
Fitness Supply recommends the Reef Power Barbell for lifters whose programme is built around the squat, bench and deadlift. If you also clean, snatch or run mixed conditioning, the PRx Thresher Barbell is the better all-rounder.
Specifications
| Specification | Detail |
|---|---|
| Barbell Type | Powerlifting |
| Barbell Length | 86.5" |
| Barbell Weight | 20kg (45 lb) |
| Shaft Coating | Hard chrome |
| Sleeve Coating | QPQ |
| Sleeve Texture | Grooved |
| Shaft Diameter | 29mm |
| Usable Sleeve Length | 16-1/8" |
| Static Load Capacity | 2,000 lb |
| Tensile Strength | ≥220,000 PSI ± 5% |
| Whip Level | Low |
| Knurling Type | Mountain |
| Knurling Aggression | Aggressive |
| Knurling Marks | IPF |
| Bushing or Bearing | Derlin shaft bushings |
A Note on Whip
Whip describes the flex and rebound of a barbell shaft under load. Higher whip helps generate momentum in Olympic lifts, while low whip keeps a bar steady and predictable under maximal squats, presses and pulls. The Reef is deliberately set to low whip, which is what a powerlifting bar should be.
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.
PRx Reef Power Barbell
Vendor: PRx Performance
Need help with choosing the right product?
Click here to reach out to one of our experts.
Building Dream Gyms Takes Precision 🏋️♂️
At Fitness Supply, we’re focused on building dream gyms—not just stocking shelves. To offer the best selection and pricing, many of our products are ordered directly from our manufacturing partners and may not be stocked in our warehouse. Lead times may vary based on availability.
Built Stiff for the Big Three
The PRx Reef Power Barbell is a dedicated powerlifting bar: a 29mm shaft with low whip, aggressive mountain knurling from end to end, and a 2,000 lb static load rating. Under a maximal squat it stays where you put it instead of oscillating on the walk-out.
The shaft is fully knurled with IPF standard marks, so the bar grips your back on squats and your hands on deadlifts. If your training is squat, bench and deadlift, this is the bar built for it.
Key Features
The highest capacity in the PRx barbell range, rated for the heaviest powerlifting loads.
Rated at ≥220,000 PSI ± 5%, exceptionally high-tensile steel for a stiff, resilient shaft.
A rigid 29mm shaft that does not bounce or sway when you unrack a maximal squat.
Sharp mountain knurling holds a heavy deadlift without a hook grip slipping.
Knurl runs the full length, including the centre, so the bar locks onto your back under a low-bar squat.
Powerlifting standard markings for competition-accurate hand and grip placement.
Grooved sleeve texture with a QPQ finish keeps plates from sliding once collared.
Controlled, quiet sleeve rotation that suits slow, heavy lifting rather than fast Olympic turnover.
Description
A power bar is not a general training bar with a different label. The whole design brief is stiffness. When you unrack 500 lb, a flexible bar keeps moving after you have stopped, and that oscillation costs you the setup. The Reef is built to eliminate it: a thicker 29mm shaft, ≥220,000 PSI tensile steel, and Derlin bushings that give controlled rather than free-spinning sleeves.
The knurl matches the intent. Mountain knurling is cut sharper and more aggressive than a volcano pattern, and the Reef runs it the full length of the shaft including the centre. That centre knurl is the detail powerlifters look for: under a low-bar squat it grips your shirt and back so the bar does not creep down your spine mid-set. It is also the reason this is not the bar you want for high-rep cleans.
IPF standard marks give you the competition reference points for bench grip width and hand placement, so what you rehearse at home matches what you do on the platform. Grooved QPQ sleeves keep plates seated and shrug off the wear of repeated loading.
Fitness Supply recommends the Reef Power Barbell for lifters whose programme is built around the squat, bench and deadlift. If you also clean, snatch or run mixed conditioning, the PRx Thresher Barbell is the better all-rounder.
Specifications
| Specification | Detail |
|---|---|
| Barbell Type | Powerlifting |
| Barbell Length | 86.5" |
| Barbell Weight | 20kg (45 lb) |
| Shaft Coating | Hard chrome |
| Sleeve Coating | QPQ |
| Sleeve Texture | Grooved |
| Shaft Diameter | 29mm |
| Usable Sleeve Length | 16-1/8" |
| Static Load Capacity | 2,000 lb |
| Tensile Strength | ≥220,000 PSI ± 5% |
| Whip Level | Low |
| Knurling Type | Mountain |
| Knurling Aggression | Aggressive |
| Knurling Marks | IPF |
| Bushing or Bearing | Derlin shaft bushings |
A Note on Whip
Whip describes the flex and rebound of a barbell shaft under load. Higher whip helps generate momentum in Olympic lifts, while low whip keeps a bar steady and predictable under maximal squats, presses and pulls. The Reef is deliberately set to low whip, which is what a powerlifting bar should be.
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.