Get Every Plate Off Your Floor
Plates stacked against a wall are a tripping hazard and a slow way to change weights. PRx Weight Plate Storage is a wall-mounted steel tower that mounts to a single stud and holds your whole set vertically, sorted and within arm's reach of the rack.
Each 8" peg carries two 45 lb crumb rubber plates, and thinner plates let you load more. Choose 3-Peg or 4-Peg storage, with or without the Weight Wing Extension for change plates.
Key Features
The whole tower anchors to one wall stud, so placement is flexible in any garage or gym.
Welded steel with a black powder coat finish, built for the weight it is rated to carry.
Two 45 lb crumb rubber plates per peg: 270 lb on the 3-Peg, 360 lb on the 4-Peg.
Takes any 2" collar opening plate up to 18" in diameter on 1.75" x 8" pegs.
Optional wing adds a home for change plates, up to 50 lb per side.
A shallow footprint keeps the tower out of your walking and lifting space.
All mounting hardware ships with the unit.
Fabricated and finished domestically by PRx Performance.
Description
Loose plates are the single fastest way to make a good home gym feel cramped. They spread out, they never end up sorted by weight, and they turn every warm-up into a scavenger hunt. Moving them onto the wall solves all three problems at once and gives back several square feet of usable floor.
This system is built around a vertical steel spine that mounts to one stud, with 1.75" pegs extending 8" out. That peg diameter matters: it fills the 2" collar opening of an Olympic plate closely enough that plates sit flat and stable instead of rattling. Each peg is rated for two 45 lb crumb rubber plates, and because thinner plates take less peg length, a set of competition or cast iron plates will fit more per peg.
The 3-Peg tower stands 55.5" tall and carries 270 lb; the 4-Peg is 75.5" and carries 360 lb. Both are just 3" wide and 8.5" deep, so the tower sits close to the wall and out of the way. Add the Weight Wing Extension and you get a dedicated spot for change plates under 9.5" in diameter, up to 50 lb per side. The Wing adds 4" of height and 19.5" of width, bringing the maximum loaded width to 26.5".
Select your configuration from the Style option above. If you are running crumb rubber or color fleck plates, this is where they end up looking their best.
Specifications
| Specification | Detail |
|---|---|
| Material | Steel |
| Color & Finish | Black powder coat |
| Mounting | Wall mounted to a single stud; all hardware included |
| Peg Diameter | 1.75" |
| Peg Length | 8" |
| Plate Compatibility | Olympic plates with 2" collar opening, up to 18" diameter |
| Capacity per Peg | Two 45 lb crumb rubber plates |
| Weight Wing Adds | 4" height and 19.5" width; 26.5" maximum width with plates |
| Origin | Made in the USA |
Dimensions and Capacity by Style
| Component | Dimensions (H x W x D) | Unit Weight | Capacity |
|---|---|---|---|
| 3-Peg Storage | 55.5" x 3" x 8.5" | 21 lb | 270 lb total |
| 4-Peg Storage | 75.5" x 3" x 8.5" | 28 lb | 360 lb total |
| Weight Wing Extension | 5.25" x 20" x 8.5" | 9 lb | 100 lb total, 50 lb per side, plates under 9.5" diameter |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.
PRx Weight Plate Storage (Wall Mounted)
Vendor: PRx Performance
Need help with choosing the right product?
Click here to reach out to one of our experts.
Building Dream Gyms Takes Precision 🏋️♂️
At Fitness Supply, we’re focused on building dream gyms—not just stocking shelves. To offer the best selection and pricing, many of our products are ordered directly from our manufacturing partners and may not be stocked in our warehouse. Lead times may vary based on availability.
Get Every Plate Off Your Floor
Plates stacked against a wall are a tripping hazard and a slow way to change weights. PRx Weight Plate Storage is a wall-mounted steel tower that mounts to a single stud and holds your whole set vertically, sorted and within arm's reach of the rack.
Each 8" peg carries two 45 lb crumb rubber plates, and thinner plates let you load more. Choose 3-Peg or 4-Peg storage, with or without the Weight Wing Extension for change plates.
Key Features
The whole tower anchors to one wall stud, so placement is flexible in any garage or gym.
Welded steel with a black powder coat finish, built for the weight it is rated to carry.
Two 45 lb crumb rubber plates per peg: 270 lb on the 3-Peg, 360 lb on the 4-Peg.
Takes any 2" collar opening plate up to 18" in diameter on 1.75" x 8" pegs.
Optional wing adds a home for change plates, up to 50 lb per side.
A shallow footprint keeps the tower out of your walking and lifting space.
All mounting hardware ships with the unit.
Fabricated and finished domestically by PRx Performance.
Description
Loose plates are the single fastest way to make a good home gym feel cramped. They spread out, they never end up sorted by weight, and they turn every warm-up into a scavenger hunt. Moving them onto the wall solves all three problems at once and gives back several square feet of usable floor.
This system is built around a vertical steel spine that mounts to one stud, with 1.75" pegs extending 8" out. That peg diameter matters: it fills the 2" collar opening of an Olympic plate closely enough that plates sit flat and stable instead of rattling. Each peg is rated for two 45 lb crumb rubber plates, and because thinner plates take less peg length, a set of competition or cast iron plates will fit more per peg.
The 3-Peg tower stands 55.5" tall and carries 270 lb; the 4-Peg is 75.5" and carries 360 lb. Both are just 3" wide and 8.5" deep, so the tower sits close to the wall and out of the way. Add the Weight Wing Extension and you get a dedicated spot for change plates under 9.5" in diameter, up to 50 lb per side. The Wing adds 4" of height and 19.5" of width, bringing the maximum loaded width to 26.5".
Select your configuration from the Style option above. If you are running crumb rubber or color fleck plates, this is where they end up looking their best.
Specifications
| Specification | Detail |
|---|---|
| Material | Steel |
| Color & Finish | Black powder coat |
| Mounting | Wall mounted to a single stud; all hardware included |
| Peg Diameter | 1.75" |
| Peg Length | 8" |
| Plate Compatibility | Olympic plates with 2" collar opening, up to 18" diameter |
| Capacity per Peg | Two 45 lb crumb rubber plates |
| Weight Wing Adds | 4" height and 19.5" width; 26.5" maximum width with plates |
| Origin | Made in the USA |
Dimensions and Capacity by Style
| Component | Dimensions (H x W x D) | Unit Weight | Capacity |
|---|---|---|---|
| 3-Peg Storage | 55.5" x 3" x 8.5" | 21 lb | 270 lb total |
| 4-Peg Storage | 75.5" x 3" x 8.5" | 28 lb | 360 lb total |
| Weight Wing Extension | 5.25" x 20" x 8.5" | 9 lb | 100 lb total, 50 lb per side, plates under 9.5" diameter |
Ready to Build Your Dream Gym?
Our fitness experts are here to help you design the perfect setup for your space and goals. Schedule your free consultation today and let us bring your vision to life.